Spiral freezer containing: evaporator, stainless steel belt, complete electric installation, a minimum cleaning system
etc described as follows. The spiral freezer is constructed from stainless sandwich panels
with an entrance door on both sides.

Technical specification

Main Dimensions:
Length 5850 mm
Width 3480 mm
Height 3750 mm (4750 mm with drive on top)
Feed in height 800 mm
Discharge height 3435 mm

System:
Length in feed side 600 mm
Length of discharge side 500 mm
Running direction of the belt from bottom to top
Layout 0 degrees ( side in is side out)
Number of tiers 20
Net free height for product 75 mm
Maximum retention time 75 minutes ( speed of the belt 2.45 mtr/min)
Minimum retention time 25 minutes ( speed of the belt 7.35 mtr/min)

Belt:
Type of the belt Stainless steel small radius
Designation B48-12-17
Width of the belt 18” = 457.2 mm
Useful width 16” = 406.4 mm
Useful length of the belt 183.9 mtr. Including the feed and discharge length
Useful area of the belt 63.00 m2 Including the feed and discharge

Evaporator:
Evaporator 1 piece
Refrigerant R404A or R507 pumped
Evaporation temperature -40°C at evaporator discharge
Air temperature -32°C
Execution evaporator Copper / Aluminium
Execution framing Stainless steel
Defrosting with water

Power / Connecting data:
Total refrigeration capacity 110 KW
Fans 3 pieces of 3 KW
Main drive 3 KW
Overdrive 0.55 KW
Power needed for freezer approx. 12.55 KW
Installed power freezer approx. 16.94 KW
Voltage 230/ 400V 3phase 50Hz.

Electrical Installation Complete as necessary including a touch screen, with use of standard components

Cleaning system:
A minimum of cleaning system will be installed meaning a belt washer system, a drum rinse pipe and floor cleaning all with manual valves and without the delivery of a pump or spray nozzles.